Construction fixings

We supply a wide range of European Technically Approved fixings and fasteners to the Construction industry as well as being able to offer the information neccesary to allow fasteners & anchors to be selected with the minimum of effort or
calculation. The selection of the correct fixings, fasteners or anchors can be a very complex task dependent upon many factors including load, resistance and shear requirements.

If you require guidance on your project or how to achieve a particular specification you already have please contact us using the form on our contact page or give us a call on the above number.
We can offer advice on accessories, materials, fixing methods, accesories and tools that may be required. Call us today for the latest competitive prices on any fixings including those shown here as a small example of our extensive range.

AWA Throughbolt

The AWA Throughbolt is a torque controlled through fixing suitable for use in concrete over C20/25. Zinc Plated and Clear Passivated to a minimum of 5μm it is suitable for use in dry internal conditions.

Approved throughbolt

1 Through Fixing
2 Suitable for dry internal use
3 Medium to Heavy Duty applications
4 Torque controlled expansion
5 Supplied pre-assembled for rapid
6 Embedment mark for correct
fixings ce mark
AWA throughbolt table
throughbolt method
The concrete to be well compacted, e.g.
without significant voids. Drill to the
minimum depth and diameter specified
Thoroughly clean the hole by brushing
and blowing to remove all dust and
drilling fragments
With the nut and washer in place
hammer the anchor through the fixture
into the hole to the depth mark
Tighten anchor to Recommended Torque
Need more info? Call us now on 01536 202800